A cordless cartridge gun is an electrically powered dispenser for sealants and adhesives. It delivers consistent thrust, reduces hand fatigue, and ensures precise dosing – ideal for long joints and materials with varying viscosity.
Applications
- Sanitary and kitchen installations
- Window and door assembly
- Interior finishing and drywall
- Tiling, roofing, and facades
- Automotive and metal construction
Compatible Materials
Silikon, MS polymer, acrylic, PU, epoxy resin, and 2K systems with mixing nozzle.
Main Advantages
- Constant material flow
- Less rework
- Clean finishing
Cartridge Format Compatibility
Select a model that matches your cartridges. Many guns work modularly with interchangeable holders or cylinders.
| Format |
Typical Size |
Required Holder |
Application Note |
| 310 ml Cartridge |
Standard disposable cartridge |
Open cartridge holder |
All-round use for silicone and acrylic |
| Foil Pack |
400–600 ml depending on manufacturer |
Closed cylinder for foil packs |
Less waste, consistent feed |
| 2K Cartridge |
Variable, with dual chamber |
Special holder plus mixing nozzle |
For structural bonding and repairs |
Key Selection Criteria
- Thrust Force: Determines processing of viscous or cold materials; higher values mean smoother flow.
- Feed Control: Stepless trigger, speed control, or electronic settings for precise material flow.
- Anti-Drip: Automatic retraction prevents dripping and saves cleaning time.
- Battery System: Compatibility with existing 12 V, 18 V, or 20 V platforms reduces costs.
- Weight & Ergonomics: Balanced design, non-slip grip, clear view of the nozzle.
- Accessories: Cylinders for foil packs, 2K adapters, mixing nozzles, tips, and spare plungers.
- Durability: Metal gears and robust holders minimize downtime on site.
Application Tips for Clean Results
- Remove dust, grease, and moisture; use primer if recommended by the manufacturer.
- Adjust nozzle: cut opening to joint width; always cut at an angle for better guidance.
- Set feed: start at low speed, then adjust to material and pace.
- Use Anti-Drip: release briefly after each joint for a clean finish.
- Smoothing: use suitable smoothing agent and tool in one pass; overlap transitions.
Buying Guide by Application Profile
Occasional Interior Use
Recommendation: Lightweight 310 ml gun with Anti-Drip and basic control.
Advantage: Good control with silicone and acrylic, low cost.
Professional Sanitary and Window Installation
Recommendation: 18 V system with high torque, cylinder for foil packs.
Advantage: Consistent flow, minimal waste, high speed.
Structural Bonding with 2K
Recommendation: Special 2K holders with mixing nozzle compatibility and precise feed control.
Advantage: Secure component ratio, reproducible quality.
Practical Notes
- Temperature: Pre-warm cartridge in cold conditions to improve flow.
- Maintenance: Keep plunger clean and lightly lubricated; check seals.
- Safety: Wear safety glasses, follow material data sheet, ensure ventilation.
Frequently Asked Questions
How much thrust force do I need?
Medium thrust is sufficient for standard silicone. For cold environments, wide joints, or tough MS polymers, a high-performance model is recommended.
Is a foil pack cylinder always necessary?
Only if you process foil packs. It ensures clean pressure build-up and minimizes air pockets.
Can I use my existing batteries?
Yes, if the gun belongs to your manufacturer’s battery platform. This reduces purchase and follow-up costs.