For a standard-compliant sealant joint – for example, silicone joints in sanitary areas, but also for almost all construction and expansion joints indoors and outdoors – the use of a joint backing rod, also known as backing cord, round cord, or PE cord, is highly recommended. The profile serves as a backing material, ensuring that the sealant adheres only to the joint flanks.
Taking the example of silicone joints in sanitary rooms: silicone should adhere only to the tile edges and not to the substrate. The backing cord is the optimal solution here and complies with the building standard DIN 18540, which states that a movement joint is only functional if it adheres to two flanks and not to the substrate.
The joint backing rod is made of elastic, closed-cell polyethylene (PE) foam. It is particularly resistant to aging and can also be used without issues on absorbent materials. By using it, you not only achieve significantly higher durability but also limit the joint depth, which reduces the amount of sealant required.
The corresponding joint backing rod thus limits the depth of the injected sealant. Below you will find a table showing which profile fits which joint dimensions:
Ottocord Pur Round Cord H B3 Joint Filler Profile ✔ limits joint depth ✔ softly elastic ✔ no 3-sided adhesion ✔ easy to work with ✔ ideal for joint …
Displaying 1 to 3 (of 3 products)
Joint Backing Rod – Quick Buying Guide
Joint backing rods are essential for sealing movement and expansion joints. They minimize sound bridges, support a clean and durable seal, and serve as a reliable backing for sealants. By ensuring the correct joint geometry and preventing three-sided adhesion, they significantly improve the performance and longevity of sealing systems.
When to Use Which Backing Rod?
Joint Width: Choose a diameter that fits slightly compressed (approx. 20–30% compression).
Material: PE round cord (closed-cell) for most construction applications; PUR foam (open-cell) for higher adaptability, but with greater water absorption.
Surface: Closed-cell reduces water absorption and improves adhesion conditions for sealants.
Compatibility: Compatible with common sealants (silicone, MS polymer, PU). Use only approved profiles with bitumen-/solvent-based systems.
Temperature Range: Follow manufacturer specifications (e.g., −40 to +90 °C).
Recommended Dimensions
Joint Width
Recommended Rod Ø
Compression
Application Example
3–5 mm
4–6 mm
20–30%
Interior joints, window connections
6–10 mm
8–12 mm
20–30%
Sanitary, tile joints
10–20 mm
12–25 mm
20–30%
Façades, expansion joints
Installation Instructions
Clean the joint: Remove dust, loose particles, and moisture.
Insert the rod: Press the round cord evenly to depth with a spatula or joint roller (do not damage).
Apply sealant: Avoid three-sided adhesion; shape the cross-section according to manufacturer’s instructions.
Smooth & check: Close the surface, check adhesion and geometry.