OTTO Primer 1218 – Permanent Wet Primer ensures improved adhesion of silicone sealants under permanent wet conditions. Designed for silicone on mineral substrates (e.g., concrete, mortar, joint mortar). Primer 1218 enhances adhesion of Swimming Pool Silicone S 18 on mineral substrates, Food-Grade Silicone S 27 on unglazed ceramic surfaces, Ottoseal M 350 on concrete and plaster, and Ottoseal S 140 on PVC pond liners.
One-component synthetic resin primer – specially formulated for sealants.
Areas of Application
- Improves adhesion of silicone sealants on absorbent, mineral substrates under permanent wet exposure
- For Swimming Pool Silicone S 18 on mineral substrates (e.g., concrete, mortar, joint mortar) and ceramics
- For premium natural stone silicones S 70 and S 140
- For Food-Grade Silicone S 27 on unglazed ceramic substrates
- Improves adhesion of Ottoseal M 350 on concrete and plaster
- Improves adhesion of Ottoseal S 140 on PVC pond liners
Surface Preparation
Adhesion surfaces must be cleaned thoroughly and free from release agents, preservatives, grease, oil, dust, water, old sealants/adhesives, and other substances that may impair adhesion.
- Non-porous substrates: Clean with OTTO Cleaner T (flash-off time approx. 1 minute) and a clean, lint-free cloth.
- Porous substrates: Mechanically clean surfaces (e.g., with a steel brush or grinding disc) to remove loose particles.
Application
For best results, apply OTTO Primer 1218 as follows:
- Forms a resin film ensuring excellent adhesion of oxime-curing silicones.
- For Food-Grade Silicone OTTOSEAL S 27 and Aquarium Silicone OTTOSEAL S 28 (acetate curing system), apply OTTO Primer 1218 twice on mineral substrates such as concrete. Observe a flash-off time of 60 minutes before the second application.
- After priming, wait 24 hours before applying acetate silicones.
- Protect primed surfaces from contamination (e.g., dust) using suitable coverings.
- Always perform a trial application (e.g., test joint) before starting actual sealing work to verify substrate compatibility.
- Apply primer evenly and not too thick with a suitable brush.
Note: For silicones with other curing systems, preliminary tests are recommended.
Storage
12 months from production date in unopened packaging. Store in a cool (+5°C to +25°C), dry place. Reseal opened containers tightly and use promptly.
Packaging
- 100 ml aluminum bottle (15 pcs per carton)
- 250 ml aluminum bottle (15 pcs per carton)
- 1000 ml aluminum bottle (5 pcs per carton)