OTTOFLEX Sealing Membrane Decoupling Mat is an advanced sealing solution designed for waterproofing beneath ceramic tiles and natural stone in thin-bed installation systems. It is ideal for wet areas such as bathrooms, showers, swimming pool surrounds, saunas, steam baths, and also for industrial applications in the food industry, breweries, and dairies.
Product Features
- Polyethylene sealing membrane with double-sided special fleece
- Waterproof with vapor-retardant properties
- Excellent resistance to aqueous solutions of salts, acids, alkalis, many organic solvents, alcohols, and oils
- Alkali-resistant, aging-resistant, and rot-proof
- High elongation capacity and crack-bridging
- Suitable for interior applications
Standards and Certifications
- Usable according to abP for stress classes (A1, A2, C)
- Usable according to ZDB for stress classes (0, A01, A02)
- General building authority test certificate (P5205/945/08-MPA BS)
Application Areas
OTTOFLEX Sealing Membrane Decoupling Mat is a crack-bridging, decoupling, waterproof alternative sealing membrane with special fleece for secure anchoring of tile adhesive. It is suitable for wet areas such as bathrooms, showers, swimming pool surrounds, and industrial sectors like food processing, breweries, and dairies.
Application Instructions
Preparation
Substrates must be checked for flatness, stability, and moisture. Remove any adhesion-impairing substances. Absorbent substrates should be primed with OTTOFLEX Primer. Smooth substrates (e.g., glazed tiles) require scratch-coating with polymer-modified tile adhesive.
- Residual moisture in cement screeds: max. 2.0 CM %
- Residual moisture in anhydrite screeds: max. 0.5 CM %
- Residual moisture in wall areas (cement or gypsum plaster): max. 1.0 CM %
The substrate must be clean, load-bearing, and even. Adhesive must be suitable for the substrate and anchor into the fleece of the OTTOFLEX membrane. Typically, hydraulically setting C2 tile adhesives are recommended. The membrane should be cut to size before installation.
Installation
- Apply tile adhesive evenly with a 4 x 4 mm notched trowel.
- Press OTTOFLEX membrane firmly into the adhesive, avoiding air pockets.
- Overlap joints by at least 5 cm and bond with C2 tile adhesive (class 0). For stress classes A1, A2, C, A01, A02, use OTTOCOLL M 500.
- Use OTTOFLEX system accessories (inner/outer corners, sealing collars, sealing tape) for edges and pipe penetrations.
- Once all overlaps and connections are sealed, tile installation can begin immediately.
- Apply tile adhesive directly onto the OTTOFLEX membrane for thin-bed installation. Choose adhesive according to tile type and load. For chemically stressed coverings, use suitable resin adhesives and joint mortars.
Technical Data
| Total width |
1000 mm |
| Roll length |
30 m |
| Total thickness |
0.41 mm |
| Weight |
290 g/m² |
| Temperature resistance |
-5°C to +90°C |
| Burst pressure |
3.0 bar |
| Max. tensile strength longitudinal |
89 N/15 mm |
| Max. tensile strength transverse |
45 N/15 mm |
| Elongation at break longitudinal |
80 % |
| Elongation at break transverse |
120 % |
| Effort at 25% transverse elasticity DIN 527-3 |
2.57 N/mm² |
| Effort at 50% transverse elasticity DIN 527-3 |
2.74 N/mm² |
| Water pressure resistance DIN EN 1928 |
> 1.5 bar |
| UV resistance |
< 500 h |
| Water vapor diffusion equivalent air layer thickness SD |
> 85 m |
| Adhesion strength DIN EN 1348 |
> 0.2 N/mm² |
| Building material class DIN EN 4102 |
B2 |
Color
Blue
Delivery Form
30 m x 1 m width