Ottoflex Deep Primer Plaster Primer

model
OFTG-39
manufacturer
OTTO Chemie
OTTO Chemie

Ottoflex Deep Primer ✔ Adhesion-improving primer ✔ Strengthens substrates ✔ Solvent-free ✔ For indoor & outdoor use ✔ Deep penetrating & dilutable


6,99EUR / Canister
baseprice: 6,99EUR / pro kg
incl. 19% VAT plus shipping costs (to DE)
Delivery beginn within 2 - 10 daysDelivery beginn within 2 - 10 days **


Ottoflex Deep Primer Plaster Primer

Ottoflex Primer – Deep Penetrating Base Coat

Ottoflex Primer ensures perfect priming and strengthening of absorbent and less absorbent substrates. It is ideal as a primer before applying acrylic coatings and common solvent-free tile adhesives on gypsum plasterboards, gypsum and lime-gypsum plasters, gypsum blocks, gypsum fiberboards, concrete, aerated concrete, sand-lime bricks, bricks, masonry, plasters, screeds, anhydrite and mastic asphalt screeds, construction boards, leveling compounds, and self-leveling floor compounds.

Key Features

  • Solvent-free primer for floors and walls
  • Deep penetration into the substrate
  • Excellent bonding agent for subsequent layers
  • Improves adhesion of plasters, tile adhesives, and wallpapers
  • Can be diluted up to 1:2 with water

Applications

  • Priming and strengthening of absorbent and less absorbent substrates
  • Primer before applying acrylic coatings and solvent-free tile adhesives
  • Use in tile installation according to DIN 18157-1
  • Facilitates wallpaper removal during renovation
  • Increases load-bearing capacity and substrate strength

Surface Preparation

The substrate must be solid, load-bearing, absorbent, level, and free of oil, grease, dust, and separating layers. Residual moisture of freshly installed cement screeds must not exceed 4%, and unground anhydrite or gypsum screeds must not exceed 0.5%.

Substrate Requirements

The substrate must be firm, load-bearing, absorbent, and level, free of oil, grease, dust, and separating layers. Remove residues by brushing and vacuuming. Processing temperature should be between +5 °C and +25 °C.

Application Instructions

Priming absorbent cement-based substrates: Dilute Ottoflex Primer 1:1 to 1:2 with water, mix thoroughly, and apply evenly with roller, brush, or spray. Repeat on highly absorbent substrates. After drying, apply tile adhesive or finish with paint, plaster, or wallpaper.

Priming screeds with old adhesive residues: Stir well before use, pour onto substrate, and spread evenly with a broom. Avoid puddles.

Strengthening gypsum, anhydrite, and asphalt screeds: Apply undiluted Ottoflex Primer evenly. Check consolidation with a scratch test. After drying, proceed with tile adhesive, painting, plastering, or wallpapering.

Strengthening screeds before tile installation:
1st coat: Dilute 1:1 with water, stir, and apply evenly.
2nd coat: After drying, check consolidation with a scratch test, then apply undiluted primer. After approx. 24 hours, further processing is possible.

Drying Time

Drying depends on air and substrate temperature, air movement, humidity, and coating thickness. At +20 °C and 50% relative humidity, drying time is approx. 2 hours.

Consumption

  • Cement-based substrates (diluted 1:1 to 1:2): approx. 100–200 ml/m²
  • Moisture-sealing primer for gypsum substrates (undiluted): approx. 100–150 ml/m²
  • Strengthening cement screeds before tiling (diluted 1:1): approx. 200 ml/m²

Cleaning

Clean tools and contaminated areas immediately after use with water.

Packaging

  • 1 kg bottle
  • 5 kg canister
  • 10 kg canister
  • 20 kg canister

Be the first to review this product.

Customers who bought this product also purchased

We Also Recommend