12,29EUR / bucket
baseprice: 12,29EUR / pro kg
incl. 19% VAT plus shipping costs (to DE)
Scaled Prices
from 5 bucket11,92EUR - you save 0,37EUR, baseprice: 11,92EUR / pro kg
from 10 bucket11,55EUR - you save 0,74EUR, baseprice: 11,55EUR / pro kg
from 20 bucket11,06EUR - you save 1,23EUR, baseprice: 11,06EUR / pro kg
Delivery beginn within 2 - 10 daysDelivery beginn within 2 - 10 days **


Ottoflex Haftgrund

Ottoflex Primer is a professional bonding primer for floors and walls, even on dense and smooth surfaces such as glazed tiles. With its extremely short drying time, Ottoflex Primer is compatible with standard tile adhesives and solvent-free coatings, making it the ideal choice for reliable surface preparation.

  • Solvent-free primer for floor and wall applications
  • Adhesion-enhancing primer for dense and smooth substrates
  • High bonding strength even on glazed tiles
  • Very short drying time: approx. 1 hour on non-absorbent substrates, no drying time on absorbent substrates
  • Compatible with standard tile adhesives and solvent-free coatings
  • Store and transport frost-free

Application Areas

Ottoflex Primer is suitable as a bonding bridge and primer on absorbent and non-absorbent floor and wall surfaces indoors and outdoors, prior to laying ceramic coverings. It is compatible with a wide range of substrates including:

  • Cement, lime, and gypsum plasters
  • Gypsum boards and fiberboards
  • Brick masonry, aerated concrete, sand-lime brick
  • Cement, anhydrite, magnesia, and mastic asphalt screeds
  • Wooden floorboards and self-leveling compounds
  • Natural stone, glazed tiles, steel, and glass

Creates a secure bond with subsequent coatings and thin-bed mortars based on water.

Surface Preparation

The substrate must be solid, load-bearing, absorbent, level, and free from oil, grease, dust, and separating layers. Remove residues by brushing and vacuuming.

Maximum residual moisture values:

  • Cement screed: 2%
  • Calcium sulfate screed: 0.5%
  • Calcium sulfate screed (heated): 0.3%
  • Gypsum-based plasters: 1%

(Measured with CM device)

Consumption

Depending on substrate absorbency and condition: approx. 50 – 250 g/m².

Application Instructions

Stir or shake well before use and apply with a lambskin roller. On non-absorbent substrates apply undiluted, on absorbent substrates dilute 1:1 with water. In wet areas or outdoors, protect the primer with a suitable bonded waterproofing system (OTTOFLEX Liquid Foil – for wet areas only – or OTTOFLEX Sealing Slurry). Subsequent coatings can be applied wet-on-wet on absorbent substrates. On non-absorbent substrates such as glazed tiles, steel, glass, or GRP, observe the drying time. Not suitable for solvent-based adhesives. Clean contaminated areas and tools immediately with water after use. Due to the variety of possible influences during processing and application, a test application is always recommended.

Packaging

  • 1 kg bottle
  • 6 kg bucket

Be the first to review this product.

Customers who bought this product also purchased

We Also Recommend