256,89EUR / Role
baseprice: 17,13EUR / pro m
incl. 19% VAT plus shipping costs (to DE)
Scaled Prices
from 3 Roll249,18EUR - you save 7,71EUR, baseprice: 16,61EUR / pro m
from 6 Roll244,05EUR - you save 12,84EUR, baseprice: 16,27EUR / pro m
from 12 Roll236,34EUR - you save 20,55EUR, baseprice: 15,76EUR / pro m
from 18 Roll231,20EUR - you save 25,69EUR, baseprice: 15,41EUR / pro m
Delivery beginn within 2- 10 daysDelivery beginn within 2- 10 days **


Ottoflex decoupling mat tiles

Polyethylene Sealing Membrane with Double-Sided Special Fleece

  • Ideal for critical substrates
  • Extremely high elasticity and crack-bridging capacity
  • Fast and efficient processing
  • Durable and aging-resistant
  • Strong decoupling effect
  • Waterproof and vapor-retardant
  • Alkali-resistant according to AbP principles for bonded waterproofing with tiles and slabs and ETAG 022
  • Classified as building material class B2 “normally flammable” according to DIN 4102-1

Applications

Suitable for decoupling, crack-bridging, and waterproof bonded sealing in floor areas, wet rooms, and damp rooms under ceramic coverings and natural stone in thin-bed installation. Typical applications include bathrooms, shower facilities, swimming pool perimeters, saunas, steam baths, and industrial areas in the food industry such as breweries and dairies.

Flexible bonded waterproofing under ceramic coverings and natural stone on balconies, terraces, and arcades (not above occupied rooms) with a slope ≥ 1.5%.

Standards and Testing

  • Water exposure classes W0-I, W1-I, W2-I, and W3-I for crack class R1-I according to DIN 18534
  • Meets moisture stress classes A and C according to AbP and A0 and B0 according to ZDB guidelines
  • General building authority test certificate – sheet-form waterproofing in combination with tiles and slabs for use as structural waterproofing
  • Based on PG-AIV-B testing, applicable to ÖNORM B 3407 classes W1–W6
  • EMICODE EC 1 Plus – very low emissions
  • French VOC emission class A+

Processing Instructions

Preparation

Substrates must be checked for flatness, stability, and moisture. Remove adhesion-impairing substances. Absorbent substrates should be primed with OTTOFLEX® Primer. Smooth substrates (e.g., glazed tiles) require scratch-coating with polymer-modified tile adhesive or pre-treatment with OTTOFLEX® Bonding Primer. Residual moisture limits: cement screeds ≤ 2.0 CM %, anhydrite screeds ≤ 0.5 CM %, wall plasters ≤ 1.0 CM %. Substrates must be clean, load-bearing, and even. Adhesive must match substrate type and anchor into fleece. Use thin-bed mortars of at least C2 quality (EN 12004). Cut OTTOFLEX® Membrane precisely before installation.

Installation

  1. OTTOFLEX Sealing and Decoupling Membrane: Apply tile adhesive with 4x4 mm notched trowel. Press pre-cut membrane into adhesive without air pockets or folds. Overlap joints by at least 5 cm with OTTOFLEX Sealing Tape and bond with OTTOCOLL M 500 or M 595.
  2. Corners and Movement Joints: Bond OTTOFLEX corners and sealing tape with OTTOCOLL adhesives, ensuring airtight and wrinkle-free installation.
  3. Pipe Penetrations: Apply OTTOCOLL adhesive around pipe, press OTTOFLEX collar into adhesive bead, and smooth edges.
  4. Tile Installation: Apply tile adhesive directly onto OTTOFLEX membrane in thin-bed method. Lay tiles fully bedded. Always perform test applications due to varying conditions.

Delivery Form

15 m length x 1 m width x 18 mm thickness

Be the first to review this product.

Customers who bought this product also purchased

We Also Recommend