OTTOFLEX Bathtub Sealing Tape is a flexible sealing tape designed for reliable waterproofing between shower or bathtub and wall.
- Polypropylene fleece with butyl rubber
- Flexible sealing tape
- Integrated self-adhesive butyl strip for easy installation with release liner
- Compatible with OTTO silicone sealants
Application Areas
Sealing tape for flexible waterproofing between shower or bathtub and wall.
Application Instructions
The OTTOFLEX Bathtub Sealing Tape is attached to the cleaned bathtub rim using the self-adhesive strip. Avoid folds or air pockets to ensure system tightness. Lay the sealing tape inward over the bathtub rim. If required, the one-sided self-adhesive OTTOFLEX Soundproofing Tape can be applied to the back of the sealing tape.
Connection of the tape to the wall after aligning and fixing the bathtub:
Option 1: Integration of the tape into liquid-applied composite waterproofing. Apply the first layer (OTTOFLEX Liquid Foil or OTTOFLEX Slurry) to the wall and embed the sealing tape. Cover with a second layer of waterproofing to fully integrate the tape. After drying, tiles can be installed.
Option 2: Application of the tape onto the OTTOFLEX Waterproofing Membrane. The tape is bonded over the entire surface with OTTOCOLL M 500 and then fully covered with OTTOCOLL M 500. After drying, tiles can be installed.
Finally, elastic joint sealing between tile edge and bathtub rim is carried out with a suitable sanitary silicone (e.g., OTTOSEAL S 100, OTTOSEAL S 130) and backer rod (e.g., OTTOCORD PE-B2). To connect the tape adhered to the rounded bathtub rim with the wall corner, press or shape the tape into the corner using hand or spatula. This is enabled by the plastic butyl layer in the tape.
Delivery Form
- Roll length: 4 m × width: 3 cm
- Roll length: 25 m × width: 3 cm