168,99EUR / Role
baseprice: 5,63EUR / pro m
incl. 19% VAT plus shipping costs (to DE)
Scaled Prices
from 3 Roll163,92EUR - you save 5,07EUR, baseprice: 5,46EUR / pro m
from 26 Roll152,09EUR - you save 16,90EUR, baseprice: 5,07EUR / pro m
Delivery beginn within 2- 10 daysDelivery beginn within 2- 10 days **


Ottoflex sealing membrane decoupling mat

OTTOFLEX Sealing Membrane Decoupling Mat is an advanced sealing solution designed for waterproofing beneath ceramic tiles and natural stone in thin-bed installation systems. It is ideal for wet areas such as bathrooms, showers, swimming pool surrounds, saunas, steam baths, and also for industrial applications in the food industry, breweries, and dairies.

Product Features

  • Polyethylene sealing membrane with double-sided special fleece
  • Waterproof with vapor-retardant properties
  • Excellent resistance to aqueous solutions of salts, acids, alkalis, many organic solvents, alcohols, and oils
  • Alkali-resistant, aging-resistant, and rot-proof
  • High elongation capacity and crack-bridging
  • Suitable for interior applications

Standards and Certifications

  • Usable according to abP for stress classes (A1, A2, C)
  • Usable according to ZDB for stress classes (0, A01, A02)
  • General building authority test certificate (P5205/945/08-MPA BS)

Application Areas

OTTOFLEX Sealing Membrane Decoupling Mat is a crack-bridging, decoupling, waterproof alternative sealing membrane with special fleece for secure anchoring of tile adhesive. It is suitable for wet areas such as bathrooms, showers, swimming pool surrounds, and industrial sectors like food processing, breweries, and dairies.

Application Instructions

Preparation

Substrates must be checked for flatness, stability, and moisture. Remove any adhesion-impairing substances. Absorbent substrates should be primed with OTTOFLEX Primer. Smooth substrates (e.g., glazed tiles) require scratch-coating with polymer-modified tile adhesive.

  • Residual moisture in cement screeds: max. 2.0 CM %
  • Residual moisture in anhydrite screeds: max. 0.5 CM %
  • Residual moisture in wall areas (cement or gypsum plaster): max. 1.0 CM %

The substrate must be clean, load-bearing, and even. Adhesive must be suitable for the substrate and anchor into the fleece of the OTTOFLEX membrane. Typically, hydraulically setting C2 tile adhesives are recommended. The membrane should be cut to size before installation.

Installation

  1. Apply tile adhesive evenly with a 4 x 4 mm notched trowel.
  2. Press OTTOFLEX membrane firmly into the adhesive, avoiding air pockets.
  3. Overlap joints by at least 5 cm and bond with C2 tile adhesive (class 0). For stress classes A1, A2, C, A01, A02, use OTTOCOLL M 500.
  4. Use OTTOFLEX system accessories (inner/outer corners, sealing collars, sealing tape) for edges and pipe penetrations.
  5. Once all overlaps and connections are sealed, tile installation can begin immediately.
  6. Apply tile adhesive directly onto the OTTOFLEX membrane for thin-bed installation. Choose adhesive according to tile type and load. For chemically stressed coverings, use suitable resin adhesives and joint mortars.

Technical Data

Total width 1000 mm
Roll length 30 m
Total thickness 0.41 mm
Weight 290 g/m²
Temperature resistance -5°C to +90°C
Burst pressure 3.0 bar
Max. tensile strength longitudinal 89 N/15 mm
Max. tensile strength transverse 45 N/15 mm
Elongation at break longitudinal 80 %
Elongation at break transverse 120 %
Effort at 25% transverse elasticity DIN 527-3 2.57 N/mm²
Effort at 50% transverse elasticity DIN 527-3 2.74 N/mm²
Water pressure resistance DIN EN 1928 > 1.5 bar
UV resistance < 500 h
Water vapor diffusion equivalent air layer thickness SD > 85 m
Adhesion strength DIN EN 1348 > 0.2 N/mm²
Building material class DIN EN 4102 B2

Color

Blue

Delivery Form

30 m x 1 m width

Be the first to review this product.

Customers who bought this product also purchased

We Also Recommend