OTTOFLEX Primer is a professional pretreatment solution for absorbent and highly absorbent substrates such as plasterboard, gypsum components, plaster, concrete, aerated concrete, masonry, stone, screed, chipboard, and fiberboard.
- Resin dispersion based on butadiene-styrene
- Solvent-free
- Tested in combination with OTTOFLEX Liquid Foil according to abP A1 and ZDB guidelines I/II, as well as "Testing of sealing materials and sealing systems" by the Official Materials Testing Institute for Stones and Earths, D-38678 Clausthal-Zellerfeld
Application Areas
OTTOFLEX Primer is used as a pretreatment for OTTOFLEX Liquid Foil on absorbent and highly absorbent substrates such as plasterboard, gypsum components, plaster, concrete, aerated concrete, masonry, stone, screed, chipboard, and fiberboard.
Standards and Testing
Tested in combination with OTTOFLEX Liquid Foil according to the principles for issuing a general building authority test certificate for liquid-applied sealing materials in combination with tile and slab coverings (abP) P-AB 075-03.
Surface Preparation
The substrate must be solid, load-bearing, absorbent, level, and free of oil, grease, dust, and other separating layers. Remove residues by brushing and vacuuming. Application temperature should be between +5 °C and +25 °C.
Application Instructions
Stir or shake OTTOFLEX Primer thoroughly before use and apply with a brush, broom, or painter’s brush. Clean tools with water after use. Drying time depends on air and substrate temperature, air movement, humidity, and substrate absorbency. At +20 °C and 50% relative humidity, drying time is approx. 2 hours.
Due to the variety of possible influences during processing and application, a test application must always be carried out by the user. The exact expiration date can be found on the container label and must be observed.
Consumption
Approx. 120 – 150 g/m²
Packaging
- 1 kg bottle
- 5 kg canister
- 10 kg canister
- 200 kg drum (delivery time approx. 1 – 2 weeks)